Hellermann Tyton Copper Lugs - Bell Mouth

Pack of 10

Copper cable lugs are used to terminate the ends of battery cable and welding cable so they can be connected to other electrical equipment such as starters, fuse blocks, distribution blocks, etc. Cable lugs are highly conductive and can handle very high currents. Our range of Copper Lugs/Links complies to Australian & New Zealand standard AS/NZS4325 Part 1:1995.

Important Crimping Points

Crimping FAQ

Important Crimping Points

A compression terminal with little material can be crimped with a crimp die designed for this geometry. The same terminal crimped with another die from a different system, where the die is designed for a terminal with a larger barrel, would result in lower crimp reduction which would cause overheating due to poor electrical contact.

Assembly Instructions for Cable Lugs and Ferrules

Strip conductor according to insertion depth (+10 % because of length changing of crimp sleeve)
Conductor ends must be cleaned before termination
Insert conductor fully into cable lug or ferrule
Observing the crimping direction, crimp the cable lug or ferrule using the appropriate crimping tool.
Good practice is to place dual wall heat shrink over lug barrel on positive cables after crimping